2310 W Dolarway Rd., Ellensburg, WA 98926

(509) 933-1737

Free Shipping On Orders Over $99
*some restrictions apply

2020 KTM 300 XC-W TPI ERZBERGRODEO

2020 KTM 300 XC-W TPI ERZBERGRODEO
Orange, White, and Gold
MSRP: $0.00
Our Price: $9,999.00
Manufacturer: KTM
Condition: New
VIN #: VBKXWM231LM384474
Stock #: K84474
Get yours today for a screaming price! Sticker price not including fixed fees, tax, licensing and setup, freight.

Description

The KTM 300 EXC has been at the forefront of the insane pace of development within Extreme Enduro. This nimble, lightweight all-terrain master fears no obstacle, making it the ultimate machine for taking on the renowned Iron Giant. For 2020, a special 25-year Erzberg Rodeo limited edition will be produced. Each of the 500 units, will be packed with PowerParts and a unique graphics kit to commemorate the race's silver anniversary. With everything you need to conquer the world's most extreme enduro race, this unique machine is ready to take you forward in your journey to more extreme enduro.

Specifications

ENGINE

DISPLACEMENT
293.2 cm³
DESIGN
1-cylinder, 2-stroke engine
BORE
72 mm
STROKE
72 mm
STARTER
Electric starter
TRANSMISSION
6-speed
CLUTCH
Wet, DDS multi-disc clutch, Brembo hydraulics
EMS
Continental EMS
 

CHASSIS

FRAME DESIGN
Central double-cradle-type 25CrMo4 steel
REAR SUSPENSION
WP-PDS Monoshock
FRONT BRAKE
Brembo twin-piston floating calliper, brake disc
REAR BRAKE
Brembo single-piston floating calliper, brake disc
FRONT BRAKE DISC DIAMETER
260 mm
REAR BRAKE DISC DIAMETER
220 mm
CHAIN
X-Ring 5/8 x 1/4"
 

Features

ENGINE & EXHAUST

  • ENGINE & EXHAUST KTM sets the benchmark in technology with its vast range of race-winning offroad competition 2-stroke models. Two years after the introduction of the world's first 2-stroke electronically controlled fuel injection offroad models, the success story continues with completely reworked, new generation offroad competition engines, all fitted with the revolutionary TPI system. This further demonstrates KTM's unrelenting commitment to 2-stroke advancement. The benefits are clear: besides huge improvements in fuel efficiency and exhaust emissions, the system also removes the need for pre-mixing fuel and re-jetting, meaning that with less effort, the engine always runs smoothly and crisply.
  • ENGINE The 300 cc 2-stroke engine is known and respected for offering the most powerful 2-stroke performance in its segment. Thanks to state-of-the-art engineering, innovative 2-stroke design and revolutionary TPI fuel injection technology, the 2020 powerplant is more refined than ever before. The compact and lightweight 2-stroke is a great choice for all Enduro riders searching for easy-to-ride Enduro performance with the power and torque to conquer the most extreme climbs.
  • CYLINDER The cylinder on the KTM 300 XC-W TPI ERZBERGRODEO edition, has a bore of 72mm and is fitted with a sophisticated power valve, which provides really smooth and controllable power characteristics. For the EFI application the cylinder features two lateral domes which hold the fuel injectors that supply fuel to the rear transfer ports. The downstream injection guarantees excellent atomization of the fuel with the upstreaming air. Thus, the loss of unburnt fuel is minimal for less emissions, a more efficient combustion and reduced fuel consumption. A little tube in the back of the cylinder is connected with an intake pressure sensor, which supplies pressure data to the control unit. As of the 2020 model, the cylinders feature an improved power valve unit with a sophisticated mechanism for the lateral support exhaust ports. The new exhaust port layout increases engine performance, while the upper contour of the exhaust port has been machined to ensure more accurate port timing. Last but not least the new models allow the use of a more widely available type of traditional spark plug.
  • CRANKCASES AND ENGINE COVERS The compact engine cases are manufactured using a high pressure die-cast production process which helps with weight reduction, while retaining strength and durability. The design allows for optimal shaft arrangements close to the center of gravity, resulting in ideal mass centralization and easier ride-ability. This model comes with a special PowerParts oil pug and together with the smart surface structure on the engine covers, it will continue to look as fresh as the day you bought it.
  • TRANSMISSION The KTM 300 XC-W TPI ERZBERGRODEO is now fitted with a new, more robust 6-speed transmission made by PANKL RACING SYSTEMS. The gear ratios were carried over from the predecessor, but is now made of a stronger, forged raw material, ensuring the highest durability and reliability level. Another highlight of the 300 XC-W TPI ERZBERGRODEO transmission is the no-dirt gear shifter. Similar to the footpeg design, it prevents the build-up of dirt and ensures the next gear is always available, no matter what the conditions.
  • ENGINE MANAGEMENT SYSTEM The engine management system (EMS) of the TPI models features a control unit located below the seat. The ECU defines the ignition timing and amount of fuel to inject is based on several sensor readings such as intake air pressure, throttle position and water temperature plus a new additional ambient air pressure sensor. Thanks to altitude and temperature compensation the rider does not need to worry about fiddling around with the jetting anymore. Should the rider decide to mount a radiator fan from the KTM PowerParts program, it will be controlled directly by the EMS without needing to add an additional thermal switch. The Erzberg edition comes with a map select switch, which allows the rider to select between a standard and advanced map while on the fly, for the optimal power delivery in every condition.
  • BALANCER SHAFT Say goodbye to numb feet and hands. This engine design allows the implementation of a lateral balancer shaft in order to keep the vibrations to a minimum. You know what that means: more comfort, less fatigue, more racing.
  • CLUTCH The KTM 300 XC-W TPI ERZBERGRODEO employs the KTM-developed DDS clutch (damped diaphragm steel) with a wear-free steel basket, extremely heat resistant clutch plates and nitrated steel liners. This clever design employs a diaphragm spring instead of the usual coil springs, making for considerably easier clutch action. A diaphragm spring also leaves sufficient space for a damping system to be integrated into the clutch hub. The goal is traction, but without compromising durability. Light operation and a 'telepathic' level of control come standard with this hydraulic Brembo actuated clutch. Additionally, this model comes with clutch slave cylinder protection.
  • OIL PUMP Pre-mixing 2-stroke fuel is a thing of the past for KTM TPI owners. The 2020 models are fitted with a newly designed 2-stroke oil tank featuring reworked and more flexible mountings, which greatly improve durability and reliability. In addition, a mesh filter helps prevent dirt getting into the oil pump. Mounted below the oil tank, the oil pump delivers the lubricant directly to the throttle body, where it is mixed with the incoming air to lubricate the piston and crankshaft. Using engine speed and throttle position sensor data, the engine management's precise electronic control of the oil pump ensures that the ideal amount of oil for any given conditions is used. The filler cap assembly for the oil tank is located between the fuel tank and steering head, utilizing a hose in the upper frame tube to transfer the oil to the storage container. With an average fuel-to-oil ratio of 1:80, the oil capacity of about 0.7 liters is sufficient for at least five tanks of fuel.
  • THROTTLE BODY The TPI engine is fitted with a redesigned 39mm throttle body made by Dell`Orto. The airflow is regulated by a butterfly connected with a twin-cable throttle cam, which is operated by the handlebar throttle assembly. A throttle position sensor provides airflow data to the control unit. For MY20 the idle system was reworked allowing the idle speed to be set more precisely via the bypass screw. Also, the cold start system is improved for a better supply of extra air when opening a bypass. Oil supplied by the electronically controlled oil pump via an oil intake tube is mixed with the incoming air to lubricate the moving engine parts.
  • TPI ALTERNATOR To accommodate the power requirements of the upgraded engine management system, the TPI models are fitted with a powerful 196 W alternator and a voltage regulator.

CHASSIS

  • CHASSIS When it comes to 2-stroke weaponry, keeping weight down is key. It should come as no surprise then that the KTM 300 XC-W TPI is one of the lightest, slimmest and most agile enduro machines in its class.
  • FRAME All enduro models feature new high-tech, lightweight chromoly steel frames. This includes hydro-formed elements produced by state-of-the-art robot welding. They retain their race-proven geometries, but by re-designing certain areas, the stiffness has been optimized, resulting in better feedback for the rider, playful handling and improved stability. The laterally attached engine head stays (the connection between cylinder, head and frame) are now made of aluminum, reducing vibration and further contributing to precise cornering. The bikes also feature newly designed lateral frame guards with a structured surface, improving grip, while also serving as a heat protector against the muffler on the right side. On the KTM 250 XC-W frame, the engine is lowered by 1° around the swing arm pivot improving front wheel traction significantly. The subframe is made of extra-light and stable aluminum profiles, weighing less than 900g and is 40 mm longer than before, providing better rear fender stability.
  • SWINGARM The KTM 300 XC-W TPI's one-piece aluminum swingarm is manufactured using a gravity die-cast production process, offering exceptional strength at the lowest possible weight. The single-component casting process offers low weight, perfect flex behavior and also allows for a large number of geometry solutions.

ERGONOMICS & COMFORT

  • ERGONOMICS & COMFORT Designed for complete harmony between rider and bike, KTM has exploited the knowledge from decades of race success to create perfect ergonomics on the KTM 300 XC-W TPI. Maximum rider comfort and movement in all conditions is guaranteed. Additionally, the bike features a new tail light design which fits perfectly to the new shape of the rear fender and the number plate carrier.
  • HANDLEBAR All KTM enduro models are equipped with the same high-strength aluminum tapered handlebar, made by NEKEN. The handlebar allows for four different positions. The handlebars come standard with an ODI vulcanized grip on the right side and a comfortable ODI lock-on grip, which does not require any wire or glue, on the left. Additionally, all models can be equipped with an optional handlebar map select switch, which allows to select between a standard and advanced power curve.

BODYWORK & GRAPHICS

  • BODYWORK & GRAPHICS With input from KTM's factory riders, as well as KTM R&D and Kiska Design, the new bodywork of the KTM 300 XC-W TPI pushes the boundaries of progression even further. The result is a shape across the entire range, that achieves complete harmony between rider and bike. The main goal was to provide the optimal contact points that allow a rider maximum freedom of movement and improved handling. The front and rear fenders feature an intelligent I-beam design, guaranteeing maximum stability with the lowest possible weight. A new tail light design fits perfectly to the new shape of the rear fender and the number plate carrier. The new in-mold graphics confirm the high-performance intentions of this bike, as well as KTM's never-ending quest for race-winning progression.
  • FOOTPEGS Sophisticated ´No-Dirt´ footpegs prevent clogging up the pegs, even when digging in deep ruts. The pegs on the Enduro models are 6mm higher than the ones used on SX models, which benefits ground clearance. But you can swap them at will.

SOFTWARE & ELECTRONICS

  • SOFTWARE & ELECTRONICS KTM XC-W TPI models feature the most modern engine management system of any 2-stroke off-road motorcycle. By reading various sensor data inputs, such as intake and ambient air pressure, throttle valve position and water temperature, the control unit optimizes ignition timing and the amount of fuel to inject at all altitudes and conditions.
  • BATTERY & WIRING HARNESS All engines are fitted with the proven electric starter, which is a major benefit for any offroad activity. It is powered by a super lightweight 2 ah lithium-ion starter battery which provides safe, reliable starting. A reworked wiring harness and revised packaging has most of the electrical components concentrated into a common area below the seat, making them more accessible and reliable.

All inventory listed is subject to availability and prior sale. Manufacturer's Suggested Retail Price (MSRP) if shown for a vehicle excludes set-up, freight, taxes, title, licensing or other dealer charges, and is subject to change. Individual prices may vary. Please request a quote for specific pricing.

Request Quote or More Information








Webb Powersports

Webb Powersports
2310 W Dolarway Rd.
Ellensburg, WA 98926
p: (509) 933-1737